Order Products : sales@su-jiao.com
Hanwha Total PP BJ501X
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zrunVR_Hanwha-Total-PP-BJ501X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BJ501X is a high impact block copolymer which has high ethylene-propylene rubber content. Due to optimum rubber design, BJ501X has an excellent property balance between high stiffness and impact strength. BJ501X is a User Grade for automobile battery case and cover. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus | 1320 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 49 | J/m | ASTM D256 |
| 0°C | 59 | J/m | ASTM D256 |
| 20°C | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss | 75 | ASTM D2457 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 - 200 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 200 - 230 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Pressure | 78.5 - 118 | MPa | |
| Holding Pressure | 58.8 - 98.1 | MPa |
| Injection instructions |
|---|
| Cooling Time: 25 to 40 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax RP548N | LyondellBasell Industries | PP Random Copolymer | Pro-fax |
| Rhelon G2043-00 | RheTech, Inc. | Nylon 66 | Rhelon |
| Caltex PP HT42 | GS Caltex | PP, Unspecified | Caltex PP |
| CPI PP 40 Other | CPI Binani, Inc. | PP, Unspecified | CPI PP |
| HANWHA LDPE 303 | Hanwha Chemical | LDPE | HANWHA LDPE |
