Order Products : sales@su-jiao.com
DAI-EL™ G-755CBP
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zrfSsM_DAI-EL-G-755CBP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-755CBP is a low viscosity non-cure incorporated copolymer designed for injection, extrusion and transfer applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | ASTM D792 |
| Mooney Viscosity (ML 1+10, 121°C) | 22 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 66 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.30 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 14.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 330 | % | ASTM D412 |
| Additional Information |
|---|
| All tests performed were performed under DAIKIN test methodsFluorine Content: 66%Curing characteristic, Measuring Temperature: 160°CCuring characteristic, Curelastomer: 12.0 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Purell ACP 6541A | LyondellBasell Industries | HDPE | Purell |
| THERMOLAST® K TC4PCZ (Series: AD/PA/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| DAI-EL™ G-783 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Electrafil® HDPE C GY03 MB | Techmer Engineered Solutions | HDPE | Electrafil® |
| Plantic® WR700 | Plantic Technologies Limited | Biodeg Polymers | Plantic® |
