Order Products : sales@su-jiao.com
Nanguang TPU S-80AX
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Fujian Nanguang Light Industry Co., Ltd. |
| Trademark: | Nanguang TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zlsVgG_Nanguang-TPU-S-80AX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nanguang TPU S-80AX is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 to 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 78 to 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 30.0 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 4.90 | MPa | |
| 300% Strain | 24.5 | MPa | |
| Tensile Strength | 31.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Tear Strength (Split) | 59 | kN/m | ASTM D470 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Processing (Melt) Temp | 165 to 185 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VAMPSTAT F 60GC 06 V0 28 | Vamp Tech | PPS | VAMPSTAT |
| Chansieh Phenolic J-261 | Chansieh Enterprises Co., LTD. | Phenolic | Chansieh Phenolic |
| Plaslube® PA6 ML3 BK | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| Jam HP-LL18XF5 | Jam Petrochemical Company | LLDPE | Jam |
| ESTOPLAST XU 245NN01 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
