Order Products : sales@su-jiao.com
Safrene® C 7260
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zkslHi_Safrene-C-7260.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Safrene® C 7260 Polyethylene Resin is an injection moulding grade with high flow characteristics, good mechanical strength, high stiffness and low distortion tendency. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.957 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 7.0 | g/10 min | |
| 190°C/5.0 kg | 23 | g/10 min | |
| Spiral Flow | 47.0 | cm | Internal Method |
| Viscosity Number (Reduced Viscosity) | 140.0 | ml/g | ISO 1628 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield, Compression Molded | 28.0 | MPa | |
| Break, Compression Molded | 29.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | > 600 | % | ISO 527-2/50 |
| Flexural Stress (3.5% Strain, Compression Molded) | 23.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C, Compression Molded | 4.0 | kJ/m² | |
| 23°C, Compression Molded | 4.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 71.0 | °C | ISO 306/B |
| Peak Crystallization Temperature (DSC) | 130 to 133 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 260 | °C |
| Note Message | |
|---|---|
| 1 . | Unannealed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® B1922 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| SUSTAPEEK MG red | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| ANYPOL SE-3000P | SH Energy & Chemical | PS (EPS) | ANYPOL |
| Cheng Yu FRCV100 | Cheng Yu Plastic Company Limited | Nylon 66 | Cheng Yu |
| Cheng Yu A700UV | Cheng Yu Plastic Company Limited | ABS | Cheng Yu |
