Order Products : sales@su-jiao.com
UmaPET IT
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | UmaPET |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ziHwX9_UmaPET-IT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KEY FEATURES
APPLICATIONS
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | ASTM D1204 | ||
| Flow : 150°C, 30 min, 0.0120 mm | 2.2 | % | |
| Flow : 150°C, 30 min, 0.0230 mm | 2.2 | % | |
| Across Flow : 150°C, 30 min, 0.0120 mm | 0.0 | % | |
| Across Flow : 150°C, 30 min, 0.0230 mm | 0.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic 1 | 0.45 | ||
| vs. Itself - Dynamic 2 | 0.42 | ||
| vs. Itself - Static 3 | 0.50 | ||
| vs. Itself - Static 4 | 0.48 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 12 23 | µm | |
| Film Thickness - Recommended / Available | 12, 23 µm | ||
| Tensile Strength | ASTM D882 | ||
| MD : Break, 12 µm | 216 | MPa | |
| MD : Break, 23 µm | 196 | MPa | |
| TD : Break, 12 µm | 226 | MPa | |
| TD : Break, 23 µm | 206 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 12 µm | 100 | % | |
| MD : Break, 23 µm | 100 | % | |
| TD : Break, 12 µm | 95 | % | |
| TD : Break, 23 µm | 95 | % | |
| Yield | Internal Method | ||
| 12.0 µm | 59.5 | m²/kg | |
| 23.0 µm | 31.0 | m²/kg |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Wetting Tension - Plain side | ASTM D2578 | ||
| 12.0 µm | 44 | dyne/cm | |
| 23.0 µm | 44 | dyne/cm |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | ASTM D1003 | ||
| 12.0 µm | 3.5 | % | |
| 23.0 µm | 4.5 | % |
| Note Message | |
|---|---|
| 1 . | 12 µm |
| 2 . | 23 µm |
| 3 . | 12 µm |
| 4 . | 23 µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren DJ210 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | LDPE | Sanren |
| Niuk 20NT02 | Shanghai Niuk New Plastic Technology Co., Ltd. | ABS | Niuk |
| KOPA® KN333HB30BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| MAXAMID™ PA66G13HSL-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Adsyl 7622 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adsyl |
