Order Products : sales@su-jiao.com
Generic PEI+PCE
| Category: | PEI+PCE , Polyether Imide + PCE |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zhVBCZ_Generic-PEI-PCE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PEI+PCE This information is provided for comparative purposes only. |
| General Information |
|---|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 95.8 - 96.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 70 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 5.0 | hr | |
| Rear Temperature | 321 - 349 | °C | |
| Middle Temperature | 332 - 354 | °C | |
| Front Temperature | 343 - 360 | °C | |
| Nozzle Temperature | 338 - 360 | °C | |
| Processing (Melt) Temp | 360 | °C | |
| Mold Temperature | 114 - 149 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PEI+PCEThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN AG10AP | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| ResinDirect HDPE20 | ResinDirect | HDPE | ResinDirect |
| KRATON® D1119 P | Kraton Polymers LLC | SIS | KRATON® |
| LNP™ STAT-KON™ AE006 compound | SABIC Innovative Plastics | ABS | LNP™ STAT-KON™ |
| Sumiliteresin® PR-219 | SBHPP | Phenolic | Sumiliteresin® |
