Order Products : sales@su-jiao.com
Ingeo™ 2003D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zgw6va_Ingeo-2003D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo biopolymer 2003D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed for use in fresh food packaging and food service ware applications. Ingeo biopolymer 2003D is a transparent general purpose extrusion grade that is used naturally or as part of a formulated blend. This is a high molecular weight biopolymer grade that processes easily on conventional extrusion equipment. Extruded roll stock is readily thermoformable. Applications Potential applications for Ingeo biopolymer 2003D include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Elastic Modulus - MD | 3450 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 60.0 | MPa | ASTM D882 |
| Fracture | 53.1 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 6.0 | % | ASTM D882 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 16 | J/m | ASTM D256 |
| Optical | Nominal Value | ||
|---|---|---|---|
| Clarity | Transparent |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.025 | % | |
| Hopper Temperature | 45.0 | °C | |
| Cylinder Zone 1 Temp. | 179 | °C | |
| Cylinder Zone 2 Temp. | 191 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 210 | °C | |
| Die Temperature | 191 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 20-100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR PE126 BLK 3330 | PolyOne Corporation | LDPE | Maxxam™ FR |
| SCLAIR® 14G | NOVA Chemicals | MDPE | SCLAIR® |
| SLOVASTER® B GF 40 | Plastcom | PBT | SLOVASTER® |
| Adstif HA612M | LyondellBasell Industries | PP, High Crystal | Adstif |
| Jamplast JPSANC | Jamplast, Inc. | SAN | Jamplast |
