Order Products : sales@su-jiao.com
MARPOL® LL4M 812
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zfEtmN_MARPOLLL4M812.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This resin is a butene copolymer designed for injection molding applications that require excellent toughness, good processability and tear resistance. Recommended Applications: Caps, closures and lids |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 4.00 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 510 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 293 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (-40°C) | 303 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 99.4 | °C | ASTM D1525 |
| Peak Melting Temperature | 123 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PA66 A1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 66 | Nanjing Hongrui PA66 |
| Nipol® AR 31 | Zeon Corporation | Rubber | Nipol® AR |
| HIPOLEN P® EH 71 | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| TOTAL Polyethylene HDPE MS 201 BN-NA (US) | TOTAL Refining & Chemicals | HDPE, HMW | TOTAL Polyethylene |
| Sumikon® PM-TX250 | SBHPP | Phenolic | Sumikon® |
