Order Products : sales@su-jiao.com

Osterlene® LLM1416SA

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zeX2iI_OsterleneLLM1416SA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

LLM1416 is best suited for applications requiring excellent clarity, gloss, toughness and heat seal. Typical blown film applications include; seal layer in coextrustions, heavy duty packaging and clarity packaging.

Osterlene LLM1416 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in

"...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

General Information
Additive	Processing aid Anti-caking agent (5000 ppm) Sliding agent (1000 ppm)
Features	Highlight smoothness Anti-caking property Definition, high Good toughness
Uses	Packaging
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.916	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.4	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction	> 1.0		ASTM D1894

Films	Nominal Value	Unit	Test Method
Film Puncture Energy	7.50	J	ASTM D3763
Film Puncture Force	82.7	N	ASTM D3763
secant modulus			ASTM D882
1% secant, MD	152	MPa	ASTM D882
1% secant, TD	157	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	11.7	MPa	ASTM D882
TD : Yield	10.0	MPa	ASTM D882
MD : Fracture	69.6	MPa	ASTM D882
TD : Fracture	52.4	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	520	%	ASTM D882
TD : Fracture	600	%	ASTM D882
Elmendorf Tear Strength			ASTM D1922
MD	240	g	ASTM D1922
TD	420	g	ASTM D1922

Optical	Nominal Value	Unit	Test Method
Gloss (60°)	130		ASTM D2457
Haze	4.0	%	ASTM D1003

Additional Information	Nominal Value	Unit	Test Method
Dart Impact	> 308.9	kN/m	ASTM D1709
Sealing Initial Temperature	100	°C	ASTM F88

Resin Grade	Manufacturer	Category	Trademark
ACCUTECH™ HP0334T40L	ACLO Compounders Inc.	PP Homopolymer	ACCUTECH™
APICAL 200AV	Kaneka Corporation	PI, TS	APICAL
Ebalta BIV 800 / BIV 60-1	Ebalta Kunststoff GmbH	Epoxy	Ebalta
Rotuba CAP CP801 (13% Plasticizer)	Rotuba Extruders, Inc.	CAP	Rotuba CAP
VALOX™ K4560 resin	SABIC Innovative Plastics	PBT	VALOX™