Order Products : sales@su-jiao.com
En Chuan 6021H
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zdyuXn_En-Chuan-6021H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This is a non-accelerator and non-wax type resin. It has the water clear transparency and good compatibility with pigments and fillers. This resin is specially designed for the manufacturing of buttons. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 35 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 3750 | MPa | ASTM D790 |
| Flexural Strength | 79.4 | MPa | ASTM D790 |
| Additional Information |
|---|
| Transparent Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 1.0 - 1.2 | Pa·s | |
| Gel Time (25°C) | 2.0 - 4.5 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 53.9 | MPa | |
| Tensile Elongation at Break | 1.8 | % |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon 1022B | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Clariant Nylon 6/6 66G33M | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| DuraSurf™ BSR | Crown Plastics | UHMWPE | DuraSurf™ |
| FUDOWLITE® F5636F | Fudow Co., Ltd. | Phenolic | FUDOWLITE® |
| Durethan® AC 30 DUS027 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
