Order Products : sales@su-jiao.com

Absylux® CN-P

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	Westlake Plastics Company
Trademark:	Absylux®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zdfsgZ_Absylux-CN-P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Carbon-powder-filled conductive material with high strength and stiffness, and relatively high impact strength. This material is easily machined and fabricated into close tolerance finished parts.

Advantages:

Good strength and stiffness

Cost effective

Easily machined

Good chemical resistance

Durable

Bondable

Applications:

Disk drive assembly fixtures

Semiconductor/electronic components

Electronic component transfer trays

Telecommunications hardware

Automotive equipment

General Information
Filler / Reinforcement	Carbon Powder
Features	Bondability Durable Good Chemical Resistance High Impact Resistance High Stiffness High Strength Machinable Semi Conductive
Uses	Automotive Applications Electrical Parts Electrical/Electronic Applications Telecommunications
Appearance	Black
Forms	Film Rod Sheet

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.03	g/cm³	ASTM D792
Water Absorption (24 hr)	0.30	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	27.6	MPa	ASTM D638
Tensile Elongation (Break)	11	%	ASTM D638
Flexural Modulus	1930	MPa	ASTM D790
Flexural Strength	49.6	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	53	J/m	ASTM D256
Unnotched Izod Impact	720	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	85.0	°C	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+2 to 1.0E+6	ohms	ASTM D257
Volume Resistivity	1.0E+2 to 1.0E+6	ohms·cm	ASTM D257
Static Decay - 15% RH	< 0.1	sec	MIL B-81705

Flammability	Nominal Value	Unit	Test Method
Flame Rating	HB		UL 94

Resin Grade	Manufacturer	Category	Trademark
ALCOM® PA66 910/1 GF30 PTFE20	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
Diakon® ST20G8	Lucite International Inc.	Acrylic (PMMA)	Diakon®
Diakon® MG102K	Lucite International Inc.	Acrylic (PMMA)	Diakon®
Ebalta AH 110 / GL	Ebalta Kunststoff GmbH	Epoxy	Ebalta
Osterlene® PPC30-SHINA	Osterman & Company	PP Impact Copolymer	Osterlene®