Order Products : sales@su-jiao.com
Kemcor LDX 151
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zd8hdS_Kemcor-LDX-151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 140 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 9.00 | MPa | |
| Break | 9.00 | MPa | |
| Tensile Elongation (Break) | 90 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 140 to 160 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® SJ9300C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| Network Polymers HDPE 50 0149 | Network Polymers, Inc. | EHMWPE | Network Polymers HDPE |
| ASTALOY™ PC/PET C70L9 | Marplex Australia Pty. Ltd. | PC+PET | ASTALOY™ |
| Iupilon® EGN2020DR 9913A | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| TECACOMP® PA66 GF35 CF10 HI 3146 | Ensinger GmbH | Nylon 66 | TECACOMP® |
