Order Products : sales@su-jiao.com
UBE Polyethylene J2522
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zakyNz_UBE-Polyethylene-J2522.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene J2522 is a Polyethylene material. It is available in North America for injection molding. Important attributes of UBE Polyethylene J2522 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 47 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 9.50 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Apparent Bending Modulus | 130 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -42.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 87.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Versaflex™ CL E95 | PolyOne Corporation | TPE | Versaflex™ |
| Adell Polyamide AR-17 (P) | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| DuraGrip® DGR 6260TR | Advanced Polymer Alloys | TPE | DuraGrip® |
| LEXAN™ XHT3141 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Sumiliteresin® PR-8000 | SBHPP | Phenolic | Sumiliteresin® |
