Order Products : sales@su-jiao.com

KRATON® D1101 J

Category:	SBC , Styrene Butadiene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zWS0D2_KRATON-D1101-J.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton D1101 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Japan in the physical form(s) outlined in the following grade nomenclature. D1101 JO - supplied as dusted crumb D1101 JU - supplied as undusted crumb D1101 JSM - supplied as powder dusted with amorphous silica Kraton D1101 J is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Message

Kraton D1101 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Japan in the physical form(s) outlined in the following grade nomenclature.

D1101 JO - supplied as dusted crumb

D1101 JU - supplied as undusted crumb

D1101 JSM - supplied as powder dusted with amorphous silica

Kraton D1101 J is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

General Information
Features	Block Copolymer
Uses	Adhesives Asphalt Modification Coating Applications Footwear Plastics Modification Sealants
Appearance	Clear/Transparent
Forms	Crumb Powder

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	< 1.0	g/10 min	ASTM D1238
Bound Styrene	28.0 to 34.0	%
Ash Content			ISO 247
JO	< 1.0	%
JSM	< 5.0	%
JU	< 0.50	%
Solution Viscosity - Toluene, 25%wt (25°C)	3.0 to 5.0	Pa·s	Internal Method
Volatile Matter - 2 hr (110°C)	< 1.0	%

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A, 30 sec)	72		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	2.90	MPa	ISO 37
Tensile Stress (Yield)	33.0	MPa	ISO 37
Tensile Elongation (Break)	880	%	ISO 37

Resin Grade	Manufacturer	Category	Trademark
Resinoid 2010	Resinoid Engineering Corporation	Phenolic	Resinoid
TOTAL Polypropylene Lumicene® M 3283 WZ	TOTAL Refining & Chemicals	PP Homopolymer	TOTAL Polypropylene
TOTAL Polypropylene PPC 4640	TOTAL Refining & Chemicals	PP Impact Copolymer	TOTAL Polypropylene
TRISTAR® PC-10FRN(V)	Polymer Technology and Services, LLC	PC	TRISTAR®
Galloo GP-PP-78T10	Galloo Plastics	PP, Unspecified	Galloo