Order Products : sales@su-jiao.com

Veradel® 3400P

Category:	PESU , Polyethersulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Veradel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zV2sAL_Veradel-3400P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives. This grade was formerly marketed as Gafone™ PESU

Message

Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity.

PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance.

Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.

This grade was formerly marketed as Gafone™ PESU

General Information
Features	Acid Resistant Flame Retardant Good Adhesion Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Thermal Stability Good Toughness High Heat Resistance High Tensile Strength Hydrolysis Resistant Medium Flow Medium Molecular Weight Medium Rigidity
Uses	Adhesives Coating Applications Compounding
Agency Ratings	NSF 51 2
RoHS Compliance	Contact Manufacturer
Appearance	Transparent - Slight Yellow
Forms	Granules Powder
Processing Method	Coating Solution Processing Spraying

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792
Water Absorption (24 hr)	0.60	%	ASTM D570
Solution Viscosity ¹	370	mPa·s	Internal Method
Residual Solvent	0.50	%	Internal Method

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	220	°C	ASTM E1356
CLTE - Flow	4.9E-5	cm/cm/°C	ASTM D696

Note Message
1 .	25% in dimethylacetamide at 40°C

Resin Grade	Manufacturer	Category	Trademark
Nypol® PA A3 G20 HS NTLA013 NR437	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Appeel® 11D554	DuPont Packaging & Industrial Polymers	EVA	Appeel®
DiaAlloy TCL-1	Mitsubishi Rayon America Inc.	PC	DiaAlloy
HiFill® PA6/6 GF18 FR BK	Techmer Engineered Solutions	Nylon 66	HiFill®
PLUSTEK RA334G6	Polyram Ram-On Industries	Nylon 66	PLUSTEK