Order Products : sales@su-jiao.com
Multi-Flex® TPE A8103 E
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zU4UmI_Multi-Flex-TPE-A8103-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A8103 E is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 79 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.27 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 590 | % | ASTM D412 |
| Tear Strength | 47.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 5 Temp. | 202 | °C | |
| Melt Temperature | 199 | °C | |
| Die Temperature | 207 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Desmopan® DP 3868D | Covestro - PUR | TPU-Polyester | Desmopan® |
| Estaloc® 59104 RETPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estaloc® |
| Iupilon® GSH2020DT 9010 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Lionpol HC-205555 | Lion Polymers Incorporated | TPE | Lionpol |
| Starex LX-0760 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
