Order Products : sales@su-jiao.com
Tool-A-Thane UT-10
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Urethane Tooling & Engineering Corp |
| Trademark: | Tool-A-Thane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zT0uAn_Tool-A-Thane-UT-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | |
| Molding Shrinkage - Flow | 1.7 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | |||
| Shore A | 98 | ||
| Shore D | 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1(vs. Steel - Dynamic) | 0.30 | ||
| Abrasion Resistance - NBS Index | 375 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Graves Tear | 148.9 | kN/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bayshore Resistance - NBS Index | 55.0 | ||
| Penetration Depth - Recommended for optimum life | 10 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain | 17.2 | MPa | |
| 300% Strain | 46.2 | MPa | |
| Tensile Strength | 50.0 | MPa | |
| Tensile Elongation (Break) | 350 | % | |
| Tear Strength (Split) | 22 | kN/m | ASTM D470 |
| Compression Set 2(70°C, 22 hr) | 42 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -67.8 | °C |
| Note Message | |
|---|---|
| 1 . | at 20 lbs load at 52 fpm |
| 2 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULATEC® PEEK WR 30 NV 12 | A. Schulman Europe | PEEK | SCHULATEC® |
| NEXT REGRIND PA66 3189HSL-300RG | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT REGRIND |
| ALCUDIA® HDPE 5502E | REPSOL | HDPE, HMW | ALCUDIA® HDPE |
| Axiall PVC 39041 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| HiFill® PA6/6 IM L UV | Techmer Engineered Solutions | Nylon 66 | HiFill® |
