Order Products : sales@su-jiao.com
Stanyl® TC154
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zSFC3V_Stanyl-TC154.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stanyl® TC154 is a Polyamide 46 (Nylon 46) material. It is available in Asia Pacific, Europe, or North America. Important attributes of Stanyl® TC154 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.52 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 0.70 | % | |
| Flow | 0.60 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5100 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength (23°C) | 2.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE | ISO 11359-2 | ||
| Flow | 4.8E-5 | cm/cm/°C | |
| Transverse | 4.8E-5 | cm/cm/°C | |
| Thermal Conductivity | ASTM E1461 | ||
| -- 1 | 0.50 | W/m/K | |
| -- 2 | 1.0 | W/m/K | |
| RTI Elec (0.750 mm) | 140 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 30 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 225 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification | IEC 60695-11-10, -20 | ||
| 0.750 mm | V-0 | ||
| 1.50 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 280 to 320 | °C | |
| Middle Temperature | 300 to 320 | °C | |
| Front Temperature | 300 to 320 | °C | |
| Nozzle Temperature | 305 to 335 | °C | |
| Processing (Melt) Temp | 305 to 325 | °C | |
| Mold Temperature | 80.0 to 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 2.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | Through Plane |
| 2 . | In Plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Braskem PP KM 6150 | Braskem | PP Homopolymer | Braskem PP |
| CHEMIGUM® P615DS | Omnova Solutions Inc. | NBR | CHEMIGUM® |
| Geon™ Vinyl Flexible A80U0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Elastron® V V101.A55.B | Elastron USA, Inc. | TPV | Elastron® V |
| Hanwha Total PP SI73 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
