Order Products : sales@su-jiao.com
UBE Polyethylene J3519
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zS2ImO_UBE-Polyethylene-J3519.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Polyethylene J3519 is a Polyethylene material. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.50 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Apparent Bending Modulus | 100 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 77.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA6MG40HSL-BK09 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| ADDINYL C2 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Ferro PP WPP10SD04BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| GAPEX® RPP25EB48HB BLACK | Ferro Corporation | PP Homopolymer | GAPEX® |
| LNP™ THERMOCOMP™ UF006AS compound | SABIC Innovative Plastics | PPA | LNP™ THERMOCOMP™ |
