Order Products : sales@su-jiao.com
Axiall PVC 6325 GRAY 312
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Axiall Corporation |
| Trademark: | Axiall PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zRGS44_AxiallPVC6325GRAY312.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AXIALL's Georgia Gulf 6325 is a molding compound designed for the molding of electrical fittings where stiffness value is of primary consideration. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 12363 | ASTM D1784 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3590 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 44.1 | MPa | ASTM D638 |
| Flexural Modulus | 3520 | MPa | ASTM D790 |
| Flexural Strength | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 72.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 69.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 202 - 207 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2601X1 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Network Polymers SMMA MS 221 | Network Polymers, Inc. | Acrylic (SMMA) | Network Polymers SMMA |
| ADEKA EP-4911-75P | Adeka Corporation | Epoxy | ADEKA |
| EMLON® 6 GFR 20 | EMAS Plastik San.Tic.AS. | Nylon 6 | EMLON® |
| POCAN® TS 3221 901510 | LANXESS GmbH | PBT+PET | POCAN® |
