Order Products : sales@su-jiao.com

NuSil FS1-3730

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zPfngU_NuSil-FS1-3730.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Bonds Aggressively

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Bonds Aggressively

General Information
Features	Bondability Electrically Conductive Fuel Resistant
Uses	Adhesives Aircraft Applications Sealants

Thermoset	Nominal Value	Unit
Tack Free Time	30.0	min

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Extrusion Rate	150	g/min
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.40	g/cm³
Curing Time (23°C)	1.7E+2	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Lap Shear Strength	1.90	MPa
Tensile Strength	5.86	MPa
Tensile Elongation at Break	430	%
Tear Strength	10.5	kN/m

Resin Grade	Manufacturer	Category	Trademark
Rigidex® P 800xCA40	INEOS Olefins & Polymers Europe	PP Impact Copolymer	Rigidex® P
UBESTA 3024GC6	UBE Industries, Ltd.	Nylon 12	UBESTA
Delrin® 900P BK602	DuPont Performance Polymers	Acetal (POM) Homopolymer	Delrin®
Lotader® 3410	Arkema	EBA	Lotader®
Lucky Enpla LAY8008L	Lucky Enpla Co LTD	ASA+PC	Lucky Enpla