Order Products : sales@su-jiao.com

PRIMATOP HDPE 080960

Category:	HDPE , High Density Polyethylene
Manufacturer:	Amco Polymers
Trademark:	PRIMATOP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zMm6Og_PRIMATOP-HDPE-080960.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PRIMATOP HDPE 080960 is a High Density Polyethylene material. It is available in North America for injection molding. Important attributes of PRIMATOP HDPE 080960 are: Food Contact Acceptable Good Toughness High Gloss High Stiffness Typical applications include: Containers Food Contact Applications

Message

PRIMATOP HDPE 080960 is a High Density Polyethylene material. It is available in North America for injection molding.

Important attributes of PRIMATOP HDPE 080960 are:

Food Contact Acceptable

Good Toughness

High Gloss

High Stiffness

Typical applications include:

Containers

Food Contact Applications

General Information
Features	Food Contact Acceptable High Gloss High Stiffness Ultra High Toughness
Uses	Crates Tool/Tote Box
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	70		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	32.1	MPa	ASTM D638
Flexural Modulus	1210	MPa	ASTM D790

Resin Grade	Manufacturer	Category	Trademark
Tecomid® NA40 AR20 NL HS	Eurotec Engineering Plastics	Nylon 66	Tecomid®
U-polymer P-5001	UNITIKA Plastics Division	Polyarylate	U-polymer
Nordbak High Temp. Pneu Wear	Loctite®	Epoxy	Nordbak
Grilamid® LV-30H FWA nat	EMS-GRIVORY	Nylon 12	Grilamid®
Sylvin 9940-85 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin