Order Products : sales@su-jiao.com
MTEGRITY™ LDPE LD220AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zKBIih_MTEGRITYLDPELD220AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Low Density Polyethylene
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD | 214 | MPa | ASTM D882 |
| 1% secant, TD | 255 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 24.8 | MPa | ASTM D882 |
| TD : Yield | 21.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 200 | % | ASTM D882 |
| TD : Fracture | 550 | % | ASTM D882 |
| Dart Drop Impact | 100 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 350 | g | ASTM D1922 |
| TD | 180 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 75 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A BI5828 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| Keltan® ECO 6950 | LANXESS Buna GmbH | EPDM | Keltan® |
| Petrothene® GA694000X01 | LyondellBasell Industries | LLDPE | Petrothene® |
| Sumiliteresin® PR-310 | SBHPP | Phenolic | Sumiliteresin® |
| Lifoflex® UV FLAM 80600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
