Order Products : sales@su-jiao.com
RTP 4087 UP
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zGDT56_RTP-4087-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.39 | g/cm³ | ISO 1183 |
| Moisture Content | 0.050 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 41500 | MPa | ISO 527-2 |
| Tensile Stress | 360 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 1.4 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 34500 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 580 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 9.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 80 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 105 | °C | |
| Drying Time - Desiccant Dryer | 4.0 - 6.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 300 - 330 | °C | |
| Mold Temperature | 135 - 160 | °C | |
| Injection Pressure | 70.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zetpol® 2010L | Zeon Corporation | NBR | Zetpol® |
| Bayblend® T90 XF | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| ASTALAC™ ABS M163 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Fluoraz FEPM 797 | Greene, Tweed & Co. | FEP | Fluoraz |
| KumhoSunny ABS HU621 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
