Order Products : sales@su-jiao.com
TechnoFin PP EPDM T 30
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zG3qLQ_TechnoFinPPEPDMT30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ranging from commodity to tailor-made compound |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 8.00 | cm³/10min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 44.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2200 | MPa | ISO 527-2/1 |
| Tensile Stress | |||
| Yield | 25.0 | MPa | ISO 527-2/50 |
| Fracture | 21.8 | MPa | ISO 527-2/5 |
| Tensile Strain | |||
| Yield | 6.0 | % | ISO 527-2/50 |
| Fracture | 8.1 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 2770 | MPa | ISO 178 |
| Flexural Stress 2 | 39.3 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 2.3 | kJ/m² | ISO 179/1eA |
| 23°C | 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 21 | kJ/m² | ISO 179/1eU |
| 23°C | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 100 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 56.0 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tekuform C9 | TEKUMA Kunststoff GmbH | Acetal (POM) Copolymer | Tekuform |
| TAIRIPRO K1011 | Formosa Plastics Corporation | PP Homopolymer | TAIRIPRO |
| Wellamid® MRGF25/15 42H-BK848 (Interior) | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| Vyncolit® E 3938 | Vyncolit N.V. | Epoxy | Vyncolit® |
| 4PROP® 9C13100 | 4Plas | PP Copolymer | 4PROP® |
