Order Products : sales@su-jiao.com
ExxonMobil™ LLDPE LL 8450 Series
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zF8Mg6_ExxonMobil-LLDPE-LL-8450-Series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LL 8450 series is a linear low density ethane copolymer with excellent hardness, processability, whiteness and environmental stress cracking resistance. They can be ideally used for applications where a good balance between hardness and processability is required. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, F50 | 60.0 | hr | ASTM D1693A |
| 100% Igepal, F50 | > 980 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 16.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 20 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 621 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength | ARM | ||
| -40°C, 3.18 mm | 81 | J | ARM |
| -40°C, 6.35 mm | 217 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 50.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 36.0 | °C | ASTM D648 |
| Peak Melting Temperature | 126 | °C | ASTM D3418 |
| Additional Information |
|---|
| '- 除了 ESCR 是基于模压样本测定之外，所有物理性能均基于 3 mm 的滚塑样本 测定，除非注明的是其他值。 拉伸测试以 50 mm/min 的十字头速度进行。所报告的拉伸强度指的是在测试过 程中达到的最大应力。 可以修改测试流程以适应操作条件或设施限制。 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4803 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Promyde® B30 P2 G30 U0 | NUREL, S.A. | Nylon 6 | Promyde® |
| FR-PET® C3015FA | Polyplastics Co., Ltd. | PET | FR-PET® |
| EPO-TEK® H65-175MP | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Kazan HDPE 273-285 | Kazanorgsintez Joint Stock Company | HDPE | Kazan HDPE |
