Order Products : sales@su-jiao.com
Sinvicomp SSZ3708
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zCqQ3G_Sinvicomp-SSZ3708.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp"SSZ 3708 is a wire & cable polyvinylchloride compound available in pellet form. SSZ 3708 meets the requirements for AVSS PVC compound. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 25.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 320 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength 1(70°C, 4 hr, in IRM 902 Oil) | 10 | % | IEC 60811-2-1 |
| Change in Ultimate Elongation 2(70°C, 4 hr, in IRM 902 Oil) | 15 | % | IEC 60811-2-1 |
| Changes in mechanical properties after hot air aging test, 100°C, 120 hr 3 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 10 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 6.0E+13 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 5 days, 100±2°C 4(100°C) | 1.00 | mg/cm² | IEC 811-3-2 |
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 160°C~170°CMixing zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | 70±2°C |
| 2 . | 70±2°C |
| 3 . | 100±2°C |
| 4 . | 5 days, 100±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP GP3103Y | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| TES J-1200/20/VO/Natl | Techmer Engineered Solutions | ABS | TES |
| AMTOPP CP30 | Inteplast Group | PP, Unspecified | AMTOPP |
| INTOL® 1500 | Versalis S.p.A. | SBR, Emulsion | INTOL® |
| Sylvin 8773-60D Grey 9509 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
