Order Products : sales@su-jiao.com
Premi-Glas® 2206-22 CR-SX
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Premix, Inc. |
| Trademark: | Premi-Glas® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z8wdGC_Premi-Glas-2206-22-CR-SX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premi-Glas® 2206-22 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.75 to 1.85 | g/cm³ | |
| Molding Shrinkage - Flow | 0.10 to 0.25 | % | |
| Outdoor Suitability | f1 | UL 746C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9000 | MPa | ASTM D638 |
| Tensile Strength | 40.0 | MPa | ASTM D638 |
| Flexural Modulus | 9000 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Poisson's Ratio | 0.30 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 490 | J/m | ASTM D256 |
| Unnotched Izod Impact | 650 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE | |||
| Flow 1 | 1.5E-5 | cm/cm/°C | |
| Transverse 2 | 2.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.36 | W/m/K | |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 18 | kV/mm | ASTM D149 |
| Arc Resistance | > 180 | sec | ASTM D495 |
| Comparative Tracking Index | 600 | V | ASTM D2303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (2.30 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 150 | °C | |
| Injection Pressure | 3.50 to 6.50 | MPa |
| Note Message | |
|---|---|
| 1 . | XY Direction |
| 2 . | Z Direction |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 A TFE 13 SI 2 | RTP Company | Nylon 6 | RTP |
| NEFTEKHIM PP 9236N | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| APEX® 3800-80NT1 | Teknor Apex Company | PVC, Flexible | APEX® |
| Ferro PP HPP30GR45BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Delas 180 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PVC+NBR | Delas |
