Order Products : sales@su-jiao.com
VENYL ST300 - 8229
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | AD majoris |
| Trademark: | VENYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z7PADi_VENYL-ST300---8229.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VENYL ST300 - 8229 is a 30 % mineral filled polyamide 6 intended for Injection moulding. APPLICATIONS VENYL ST300 - 8229 has been developed especially for very demanding applications in automotive industry and electrical parts. VENYL ST300 - 8229 is available in both black and natural (VENYL ST300) but other colours can be provided on request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.37 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.60 to 1.0 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.9 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 6500 | 3000 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 75.0 | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | 10 | % | ISO 527-2 |
| Flexural Modulus | 5000 | 2500 | MPa | ISO 178 |
| Flexural Stress | 145 | 80.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | 9.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 30 | 70 | kJ/m² | ISO 179 |
| Notched Izod Impact | 40 | 50 | J/m | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 205 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 180 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | -- | ohms | DIN 53482 |
| Volume Resistivity | 1.0E+14 | -- | ohms·cm | DIN 53482 |
| Comparative Tracking Index (Solution A) | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Rear Temperature | 265 to 280 | °C | |
| Middle Temperature | 255 to 270 | °C | |
| Front Temperature | 255 to 270 | °C | |
| Nozzle Temperature | 240 to 275 | °C | |
| Mold Temperature | 60.0 to 100 | °C | |
| Injection Pressure | 60.0 to 90.0 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 50.0 to 70.0 | MPa | |
| Screw L/D Ratio | 15.0:1.0 to 20.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Polyethylene J2522 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| Elastron® D D100.A58.B | Elastron USA, Inc. | SBS | Elastron® D |
| HOPELEX PCP-2605 | Lotte Chemical Corporation | PC | HOPELEX |
| OnFlex™ S HS 70A-3E2543 | PolyOne Corporation | TPE | OnFlex™ |
| Sylvin 7833-95C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
