Order Products : sales@su-jiao.com
Generic EA
| Category: | EA , Ethylene Acrylate Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z57KOG_Generic-EA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic EA This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.927 - 0.944 | g/cm³ | ASTM D792 |
| 23°C | 0.927 - 0.944 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.9 - 9.2 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shear Strength (23°C) | 7.43 - 18.4 | MPa | ASTM D732 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 90.0 - 98.1 | °C | ASTM D3418, ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 139 - 160 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 160 - 235 | °C | |
| Cylinder Zone 4 Temp. | 179 - 238 | °C | |
| Cylinder Zone 5 Temp. | 180 - 285 | °C | |
| Adapter Temperature | 180 - 285 | °C | |
| Melt Temperature | 170 - 310 | °C | |
| Die Temperature | 170 - 285 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic EAThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 201-87 | ExxonMobil Chemical | TPV | Santoprene™ |
| SILPURAN® 8060/70 | Wacker Chemie AG | Silicone | SILPURAN® |
| Evermore PUR UF-152 | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| Later 4 | LATI S.p.A. | PBT | Later |
| OmniLon™ PA6/6 GR33 IM6 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
