Order Products : sales@su-jiao.com
TechnoFin PP EPDM 5
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z4wVUw_TechnoFinPPEPDM5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ranging from commodity to tailor-made compound |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 8.00 | cm³/10min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 24.4 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 700 | MPa | ISO 527-2/1 |
| Tensile Stress | |||
| Yield | 15.0 | MPa | ISO 527-2/50 |
| Fracture | 18.5 | MPa | ISO 527-2/5 |
| Tensile Strain | |||
| Yield | 13 | % | ISO 527-2/50 |
| Fracture | 610 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 834 | MPa | ISO 178 |
| Flexural Stress 2 | 20.2 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 57 | kJ/m² | ISO 179/1eA |
| 23°C | 58 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ISO 179/1eU | |
| 23°C | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 55.0 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP PHC31 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
| SCANTEC PC S75R GF30 | Polykemi AB | PC | SCANTEC |
| Braskem PE TS7003 | Braskem | LDPE | Braskem PE |
| LUVOCOM® 1105/GF/30/NAT-2 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Pearlbond™ ECO D900 | Lubrizol Advanced Materials, Inc. | TPU, Unspecified | Pearlbond™ ECO |
