Order Products : sales@su-jiao.com
OmniCarb™ PC/ABS 1210
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | OMNI Plastics, LLC |
| Trademark: | OmniCarb™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z3lowV_OmniCarb-PC-ABS-1210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General Purpose PC/ABS |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 59.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 86.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 110 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 249 to 288 | °C | |
| Middle Temperature | 254 to 293 | °C | |
| Front Temperature | 260 to 299 | °C | |
| Nozzle Temperature | 249 to 293 | °C | |
| Processing (Melt) Temp | 260 to 302 | °C | |
| Mold Temperature | 37.8 to 93.3 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Regis® 6201 | Noble Polymers | Polyolefin, Unspecified | Regis® |
| Ablefilm ECF564AHF | Henkel Ablestik | Epoxy | Ablefilm |
| Elastollan® C 59 D | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Ketron® PEEK CM CA30 | Quadrant Engineering Plastic Products | PEEK | Ketron® |
| KPOL-HDPE HD K-0.35/955 BO | KPOL Chem Co. | HDPE | KPOL-HDPE |
