Order Products : sales@su-jiao.com
ELEVATE™ EF528
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | ELEVATE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z2Mo7h_ELEVATE-EF528.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Westlake ELEVATE™ EF528AA is an ethylene vinyl acetate copolymer with 18.5% VA. EF528AA is designed for blown and cast films requiring excellent optics and low heat seal initiation. High melt strength makes EF528AA an excellent choice for profile extrusions, molding, and foaming applications requiring medium VA content. Application/Uses: Flexible packaging films Peelable seals, adhesive layers Injection and blow molding Profile extrusions, tubing, wire & cable Note: *AA formulation contains no slip and no antiblock. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 2.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 18.5 | wt% |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 32 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 32 µm, blown film | 42.1 | MPa | ASTM D882 |
| 1% secant, TD : 32 µm, blown film | 50.3 | MPa | ASTM D882 |
| Tensile Strength | ASTM D638 | ||
| MD : Broken, 32 µm, blown film | 24.8 | MPa | ASTM D638 |
| TD : Broken, 32 µm, blown film | 24.1 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 32 µm, blown film | 600 | % | ASTM D882 |
| TD : Broken, 32 µm, blown film | 800 | % | ASTM D882 |
| Dart Drop Impact (32 µm, Blown Film) | 290 | g | ASTM D1709 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 67.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 85.0 | °C | ASTM D3418 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 31.8 µm, Blown Film) | 82 | ASTM D2457 | |
| Haze (31.8 µm, Blown Film) | 3.6 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blown Film Melt Temperature | °C | ||
| Cast Film Melt Temperature | °C | ||
| Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.Typical film property as measured on a 1.25 mil blown film sample fabricated at a 2.5:1 B.U.R. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOLEN H180 IM | SIBUR, LLC | PP Homopolymer | TOLEN |
| NYLEM® 66 GFR 20 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| Formolon® 28 | Formosa Plastics Corporation, U.S.A. | PVC Homopolymer | Formolon® |
| Elastron® G G501.A60.B.PS | Elastron USA, Inc. | SEBS | Elastron® G |
| MAJORIS MN300U BLACK 8229 | AD majoris | HDPE | MAJORIS |
