Order Products : sales@su-jiao.com
CERTENE™ PHB-07
| Category: | PP, HMS , High Melt Strength Polypropylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yyvQaF_CERTENE-PHB-07.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHB-07 is a certified prime grade Polypropylene designed for specialty applications requiring superior tensile strength and toughness. PHB-07 combines excellent processability with high degree of thermal stabilization, high melt strength and outstanding mechanical properties of end-products. PHB-07 applications include blow molding, strapping tape, thin-wall sheet thermoforming, small diameter pipe and profiles. PHB-07 recommended processing temperature is between 210° to 230°C. PHB-07 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1690 | MPa | ASTM D638 |
| Tensile Strength 1(Yield, Injection Molded) | 37.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Injection Molded) | 60 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 114 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 98.9 - 110 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 GR35 NL HS | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Titalon® 2300CF | Titan Plastics Compounds Co., Ltd. | Nylon 66 | Titalon® |
| Grilamid® XE 3997 nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| K-vinyl FRLS 98 | Technovinyl Polymers India Ltd. | PVC, Flexible | K-vinyl |
| POLIMAXX SP100 | IRPC Public Company Limited | ABS | POLIMAXX |
