Order Products : sales@su-jiao.com
Generic PP, High Crystal - Glass Fiber
| Category: | PP, High Crystal , High Crystallinity Polypropylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yqg96I_Generic-PP-High-Crystal---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP, High Crystal - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 - 1.35 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 - 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.55 - 0.75 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 103 - 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 58.0 - 89.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 3.0 - 5.1 | % | ASTM D638 |
| Apparent Bending Modulus (23°C) | 88.3 - 147 | MPa | ASTM D747 |
| Flexural Modulus (23°C) | 2260 - 6180 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 78 - 200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 157 - 163 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 - 220 | °C | |
| Middle Temperature | 190 - 220 | °C | |
| Front Temperature | 190 - 220 | °C | |
| Mold Temperature | 59.5 - 65.0 | °C | |
| Injection Pressure | 53.9 - 83.4 | MPa | |
| Screw Speed | 45 - 55 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP, High Crystal - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 TFE 18 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| Sinpolene TPP1020 | Teknor Apex Asia Pacific PTE. LTD. | PP Homopolymer | Sinpolene |
| Small Boss SPVC001 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Flexible | Small Boss |
| Moplen EP548R | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| ALKAMIX™ MB6008 | Qenos Pty Ltd | LLDPE | ALKAMIX™ |
