Order Products : sales@su-jiao.com
KMI KM12SAC
| Category: | Acrylic (SMMA) , Styrene Methyl Methacrylate Acrylic Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ypvhqA_KMIKM12SAC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM12SAC is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff waterclear plastic resin with excellent thermal stability. FEATURES
APPLICATIONS
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 1.9 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.60 | % | ASTM D955 |
| Water Absorption (Saturation, 23°C) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3240 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 57.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.1 | % | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength | 97.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 106 | °C | ASTM D1525 1 |
| Maximum Service Temperature | 260 | °C |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index 2 | 1.570 | ASTM D542 | |
| Transmittance (550 nm) | 91.3 | % | ASTM D1003 |
| Haze | 0.30 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 182 - 216 | °C | |
| Middle Temperature | 199 - 232 | °C | |
| Front Temperature | 210 - 243 | °C | |
| Processing (Melt) Temp | 210 - 243 | °C | |
| Mold Temperature | 32 - 60 | °C | |
| Injection Rate | Slow-Moderate |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h), 压 力1 (10N) |
| 2 . | Sodium D Line |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPC3GF1.5-Natural | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Nivionplast® B R60G NATURALE | SO.F.TER. SPA | Nylon 6 | Nivionplast® B |
| LAPEROS® A150 | Polyplastics Co., Ltd. | LCP | LAPEROS® |
| Hostacom EP3307 C11462 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Eleme NGL015FG | Eleme Petrochemical Company Ltd | LLDPE | Eleme |
