Order Products : sales@su-jiao.com
POLYCOMPO PE 1020L
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yn0bRV_POLYCOMPO-PE-1020L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 1020L is a Linear Low Density Polyethylene product. It can be processed by blown film or cast film and is available in Asia Pacific. Typical application: Film. Primary characteristic: good sealability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.909 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 2.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 50 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 16.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 430 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 110 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 115 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2660 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TEKNILID HS123 | Tekni-Films, a div of Tekni-Plex | Film, Al Foil/LDPE | TEKNILID |
| AURUM® PL6200 | Mitsui Chemicals, Inc. | PI, TP | AURUM® |
| Dynacom 401-G35 | Dynachem Co. Ltd. | Nylon 6 | Dynacom |
| 3M™ Dyneon™ Fluoroelastomer FC 1640 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
