Order Products : sales@su-jiao.com
Durez® 25378 (Injection)
| Category: | Phenolic , Phenolic |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Durez® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ylcPF0_Durez-25378-Injection-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Durez 25378 Black is a two stage heat resistant / electrical grade molding material having an excellent molded finish, low shrinkage and good heat resistance. Durez 25378 has exceptional U.L. flammability ratings and good comparative tracking index. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.61 | g/cm³ | ASTM D792 |
| Apparent Density | 0.68 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.85 | % | ASTM D6289 |
| Water Absorption | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 13100 | MPa | ASTM D638 |
| Tensile Strength | 54.0 | MPa | ASTM D638 |
| Flexural Strength | 90.0 | MPa | ASTM D790 |
| Compressive Strength | 165 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 19 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 191 | °C | ASTM D648 |
| RTI Elec (3.00 mm) | 160 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| -- 1 | 13 | kV/mm | ASTM D149 |
| -- 2 | 9.8 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 5.60 | ASTM D2520 | |
| Dissipation Factor (1 MHz) | 0.060 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Comparative Tracking Index | 220 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.510 mm | V-0 | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 3.30 mm | 5VA | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 52 | wk |
| Additional Information |
|---|
| Test Specimens Molded at 340-350°FTypical transfer-molded shrinkage is 0.005 in/in |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| 2 . | Method B (step by step) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T- 27 GF20 FRV0 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Ultradur® B 4300 G4 FC | BASF Corporation | PBT | Ultradur® |
| NYLOY® UB-0010N G45N3N | Nytex Composites Co., Ltd. | Nylon, Unspecified | NYLOY® |
| DIALAC® EX18T | UMG ABS, Ltd. | ASA | DIALAC® |
| PENTAMID A MK30 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
