Order Products : sales@su-jiao.com
Monprene® RG-19221 NAT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ylNQTQ_Monprene-RG-19221-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene RG-19221 is specifically designed for food contact applications and other regulated markets such as children's and infants products. Every ingredient used to formulate Monprene RG-19221 is either "generally recognized as safe" (GRAS), prior sanctioned, subject to an effective Food Contact Notification (FCN), subject to a Threshold of Regulation (TOR) or identified in one or more sections of Title 21 of the code of Federal Regulations published by the US FDA. This product is suitable for injection molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.888 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (175°C/2.16 kg) | 60 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 22 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 21 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| Transverse flow : 100% strain 1 | 0.510 | MPa | ASTM D412 |
| Flow : 100% strain 2 | 0.834 | MPa | ASTM D412 |
| Transverse flow : 300% strain 3 | 1.03 | MPa | ASTM D412 |
| Flow : 300% strain 4 | 1.41 | MPa | ASTM D412 |
| Tensile Strength 5 | ASTM D412 | ||
| Transverse flow : Fracture | 3.24 | MPa | ASTM D412 |
| Flow : Fracture | 1.94 | MPa | ASTM D412 |
| Tensile Elongation 6 | ASTM D412 | ||
| Transverse flow : Fracture | 750 | % | ASTM D412 |
| Flow : Fracture | 570 | % | ASTM D412 |
| Tear Strength 7 | ASTM D624 | ||
| Transverse flow | 13.5 | kN/m | ASTM D624 |
| Flow | 9.81 | kN/m | ASTM D624 |
| Compression Set 8 | ASTM D395B | ||
| 23°C, 22 hr | 30 | % | ASTM D395B |
| 70°C, 22 hr | 95 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 - 210 | °C | |
| Middle Temperature | 166 - 216 | °C | |
| Front Temperature | 171 - 221 | °C | |
| Nozzle Temperature | 177 - 227 | °C | |
| Processing (Melt) Temp | 177 - 227 | °C | |
| Mold Temperature | 15.6 - 37.8 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C). |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 182 - 232 | °C | |
| Cylinder Zone 2 Temp. | 188 - 238 | °C | |
| Cylinder Zone 3 Temp. | 193 - 243 | °C | |
| Cylinder Zone 5 Temp. | 199 - 249 | °C | |
| Die Temperature | 199 - 249 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpm |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 510mm/min |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | C mold, 510mm/min |
| 6 . | Mouth die C, 510mm/min |
| 7 . | C mold, 510mm/min |
| 8 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4281 | RTP Company | PI, TP | RTP |
| StarFlex P 7330-9000 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | Starflex |
| APEX® 90-A481R-60-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Horda E8551 | Horda Cable Compounds | PE, Unspecified | Horda |
| Laril 13-V1KC | LATI S.p.A. | PPE+PS | Laril |
