Order Products : sales@su-jiao.com
KW Plastics KWR102CA17
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ykXRwM_KW-Plastics-KWR102CA17.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer High Density Polyethelene Post-Consumer Resin Compounded with 17% Calcium Carbonate CHARACTERISTICS Increased stiffness, faster processing, improved heat deflection, lower cost. Available as mixed color and pre-colored black. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.44 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 12 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 43.7 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 8750U | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| TechnoFin MA 60 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
| Nypol® PA B3 G60 NTLA010 NT334 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| ATTANE™ 4606G | The Dow Chemical Company | ULDPE | ATTANE™ |
| INVISION™ TX 5173U | A. Schulman Inc. | TPV | INVISION™ |
