Order Products : sales@su-jiao.com
Mediprene® 880136-02
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Mediprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yi2bXT_Mediprene88013602.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Mediprene 880136-02: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 41 Shore A (4mm) Service Temperature Range: -50 to+125°C (unstressed material) Color: Transparent, but can be available in any color. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic-and vegetable oils). Recyclability: 100% recyclable Special Features: The material is based on medically approved materials. Processing: The material has excellent processing characteristics and can be processed using conventional thermoplastic fabricating methods, including injection moulding and extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 41 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 1.20 | MPa | ASTM D638 |
| 300% secant | 2.40 | MPa | ASTM D638 |
| Tensile Strength | 4.20 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 14.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 4 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SER-2001 | SHIN-A T&C | Epoxy | SHIN-A |
| Geon™ Specialty Suspension CG E 44 | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ Specialty Suspension |
| Hanwha Total PP BJ500 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| ISPLEN® PM 252 AS | REPSOL | PP Copolymer | ISPLEN® |
| LNP™ LUBRICOMP™ DCL33E compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
