Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-35A-CL-8-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yhOsgI_UNISOFT-ADHESION-AD-35A-CL-8-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer Clear bonding grade to Copolyester (PETG), PC, PS and Noryl®, HIPS and PC/ABS; excellent tear strength properties Unisoft Adhesion™ AD-35A-CL-8-01 is a general adhesion grade intended for use in injection molding and extrusion processes. All ingredients used for this compound are in compliance with certain FDA regulations |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 35 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.93 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength | 34.1 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 179 to 193 | °C | |
| Front Temperature | 199 to 218 | °C | |
| Nozzle Temperature | 224 to 246 | °C | |
| Mold Temperature | 29.4 to 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VisiJet® M3 Hi-Cast | 3D Systems | Wax | VisiJet® |
| Badaflex® TPE-S 50A 1000LD | Bada AG | TPE | Badaflex® |
| Apec® DP1-9354 | Covestro - Polycarbonates | PC | Apec® |
| INEOS PP 100-GA35 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| LEXAN™ PC2200R resin | SABIC Innovative Plastics | PC | LEXAN™ |
