Order Products : sales@su-jiao.com

Zhongfa PP pp9

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Yuyao Zhongfa Engineering Plastics Co. Ltd.
Trademark:	Zhongfa
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ygZhXb_Zhongfa-PP-pp9.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Zhongfa PP pp9 is a polypropylene material, and the filler is 20% glass fiber reinforced material. This product is available in the Asia-Pacific region and is processed by injection molding.

The main features of Zhongfa PP pp9 are:

high gloss

insulation

Good dimensional stability

chemical resistance

Heat resistance

Typical application areas include:

Electrical/electronic applications

electrical appliances

Furniture

Automotive Industry

General Information
Filler / Reinforcement	Glass fiber reinforced material, 20% filler by weight
Features	Good dimensional stability Highlight Insulation Good liquidity Good chemical resistance Heat resistance, high
Uses	Electrical/Electronic Applications Electrical appliances Furniture Application in Automobile Field
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.06	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	4.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.80 - 1.0	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	80		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	55.0	MPa	ASTM D638
Flexural Strength	75.0	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	140	°C	ASTM D648

Additional Information
Aging Resistance at 150°C: 1100 hrNotched Izod Impact, ASTM D256: 8 kJ/m²Unnotched Izod Impact, ASTM D256: 38 kJ/m²

Injection	Nominal Value	Unit
Drying Temperature	90.0 - 95.0	°C
Drying Time	2.0 - 3.0	hr
Processing (Melt) Temp	195 - 225	°C
Mold Temperature	45.0 - 80.0	°C
Injection Pressure	60.0 - 90.0	MPa

Resin Grade	Manufacturer	Category	Trademark
Task® 13	Smooth-On, Inc	PUR, Unspecified	Task®
Tarnamid® T- 27 MTR	Grupa Azoty S.A.	Nylon 6	Tarnamid®
DIC.PPS FZ-3500	DIC Corporation	PPS	DIC.PPS
LEXAN™ EXL1444 resin	SABIC Innovative Plastics	PC	LEXAN™
CYCOLAC™ G320A resin	SABIC Innovative Plastics Europe	ABS	CYCOLAC™