Order Products : sales@su-jiao.com
Lutene® LB7500
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Lutene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ydmgy9_Lutene-LB7500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LUTENE LB7500 is mainly intended for extrusion coating and can be processed uniform thickness and width. LUTENE LB7500 is also noted for the excellent heat stability and has good silicone coating processibility. LB7500 has a good adhesion strength with paper and paper board and excellent neck-in characteristic. LUTENE LB7500 contains no additives. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 8.83 | MPa | |
| Break, Compression Molded | 11.3 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 550 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 196 | MPa | ASTM D790 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Permeability 1(25°C) | 0.00196 | MPa | ASTM D393 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 107 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | 1 atm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL TP-IG30 | Polymer Resources Ltd. | PBT | PRL |
| Tecnoflon® N 215 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| Vibrathane® 8094 | Chemtura | PUR-Ester/MDI | Vibrathane® |
| Latistat 63-08 | LATI S.p.A. | Nylon 6 | Latistat |
| LNP™ STAT-KON™ DE002 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
