Order Products : sales@su-jiao.com
Devcon Ceramic Repair Putty
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ycBS13_Devcon-Ceramic-Repair-Putty.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A high performance, trowelable, ceramic-filled epoxy for rebuilding worn or damaged equipment. Intended Use:
Product features:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.69 | g/cm³ | |
| Specific Volume | 0.592 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Temperature Resistance | |||
| Dry | 177 | °C | |
| Wet | 66 | °C | |
| Tensile Shear Adhesion | 13.8 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.22 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6210 | MPa | ASTM D638 |
| Flexural Strength | 44.6 | MPa | ASTM D790 |
| Compressive Strength | 87.6 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 3.1E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.79 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | 41.0 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 7.0 Mixing ratio by capacity: 4.3 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Pot Life (24°C) | 25 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 16 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 202A TFE 5 SI 2 | RTP Company | Nylon 6 | RTP |
| Zeoforte® ZSC 4195CX | Zeon Chemicals L.P. | NBR | Zeoforte® |
| LNP™ LUBRICOMP™ WCP36 compound | SABIC Innovative Plastics Europe | PBT | LNP™ LUBRICOMP™ |
| LUVOCOM® 1-8068/GN | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Sylvin 3250-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
