Order Products : sales@su-jiao.com
Hapflex™ 1056-5
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | Hapflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ybBqPt_Hapflex-1056-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers. HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating. Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D2566 |
| Weight - per cubic inch | 19 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 5.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 4.48 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 2 | 21.0 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 | |
| Unnotched Izod Impact | No Break | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 400, Mix Ratio by Volume: 400 | ||
| Thermoset Mix Viscosity (25°C) | 4500 | cP | ASTM D4878 |
| Demold Time (21°C) | 60 to 120 | min | Internal Method |
| Note Message | |
|---|---|
| 1 . | 100 g |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOND 5010 | SILON s.ro | PP, Unspecified | TABOND |
| GAPEX® RPP30EB52WH | Ferro Corporation | PP Homopolymer | GAPEX® |
| ELASTOSIL® R 756/70 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| Elastron® G G103.A55.N | Elastron USA, Inc. | SEBS | Elastron® G |
| LNP™ THERMOCOMP™ Lexan_BFL2200 compound | SABIC Innovative Plastics Europe | PC | LNP™ THERMOCOMP™ |
