Order Products : sales@su-jiao.com

DAPCO™ 3040

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	DAPCO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yaxHUT_DAPCO-3040.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DAPCO™ 3040 is a two-component, very fast curing, self-extinguishing edge filling insert potting epoxy which cures at normal room temperature [77°F (25°C)]. Features & Benefits: Semi-thixotropic flow properties permitting use on vertical or overhead areas 100% solids content Side-by-side dispensing capability Five minute application allowing ten minute cutting ability FAR 25.853 Suggested Applications: DAPCO 3040 is used as an insert potting compound as well as edge filling for rapid tooling. The product can be applied through side-by-side cartridge.

Message

DAPCO™ 3040 is a two-component, very fast curing, self-extinguishing edge filling insert potting epoxy which cures at normal room temperature [77°F (25°C)].

Features & Benefits:
Semi-thixotropic flow properties permitting use on vertical or overhead areas
100% solids content
Side-by-side dispensing capability
Five minute application allowing ten minute cutting ability
FAR 25.853

Suggested Applications:
DAPCO 3040 is used as an insert potting compound as well as edge filling for rapid tooling. The product can be applied through side-by-side cartridge.

General Information
Features	Fast Cure Self Extinguishing
Uses	Adhesives Aerospace Applications Filling Applications
Agency Ratings	FAR 25.853
Appearance	Tan
Forms	Paste
Processing Method	Potting

Physical	Nominal Value	Unit
Specific Gravity
-- ¹	0.990	g/cm³
-- ²	1.10	g/cm³
-- ³	1.15	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	70 to 80

Mechanical	Nominal Value	Unit
Tensile Strength	24.1	MPa
Tensile Elongation (Break)	16	%
Compressive Strength
24°C	27.6	MPa
82°C	6.89	MPa

Thermoset	Nominal Value
Thermoset Components
Hardener	Mix Ratio by Weight: 100
Resin	Mix Ratio by Weight: 100

Note Message
1 .	Hardener, Part B
2 .	Mixed
3 .	Resin, Part A

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SRP8608A	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
U-polymer P-1001	UNITIKA Plastics Division	Polyarylate	U-polymer
Clariant Acetal CA9000NAT	Clariant Corporation	Acetal (POM) Copolymer	Clariant Acetal
HiFill® PES GF40	Techmer Engineered Solutions	PESU	HiFill®
KOPEL® KP3363	Kolon Plastics, Inc.	TPEE	KOPEL®