Order Products : sales@su-jiao.com
PRIMATOP LDPE 023919
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yYlWO0_PRIMATOP-LDPE-023919.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRIMATOP LDPE 023919 is a Low Density Polyethylene material. It is available in North America for blow molding. Important attributes of PRIMATOP LDPE 023919 are:
Typical application of PRIMATOP LDPE 023919: Bottles |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 100 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 8.48 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 630 | % | ASTM D638 |
| Flexural Modulus | 214 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM TPS-G 55A | RJM International, Inc. | TPE | RJM |
| Sinpolene HFR8294 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| AKROMID® B3 GF 35 1 black (2486) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Grupo IDESA HIPS HI-340-L-01 | Grupo IDESA, S.A. de C.V. | SBC | Grupo IDESA HIPS |
| SQUARE® LIM3600-70A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
