Order Products : sales@su-jiao.com
NuSil R-2160
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yWDXK8_NuSil-R-2160.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: Adhesives and Sealants Comment: High Temperature Elastomer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 10 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Red | ||
| Density | 1.20 | g/cm³ | |
| Viscosity | |||
| -- 1 | 0.65 | Pa·s | |
| -- 2 | 250 | Pa·s | |
| Curing Time (150°C) | 0.50 | hr | |
| Pot Life | 50 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 20 | ||
| Tensile Strength | 5.17 | MPa | |
| Tensile Elongation at Break | 630 | % | |
| Tear Strength | 26.3 | kN/m | |
| Electric Strength | 20 | kV/mm |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2803-80 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Next Nylon 6 Prime Series NGF2 20-01GY | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| ALTECH® PP-B A 2015/550 GF15 CP | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® PP-B |
| POLIMAXX 3325M | IRPC Public Company Limited | PP Random Copolymer | POLIMAXX |
| EPAMOULD 655D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
