Order Products : sales@su-jiao.com
Formolene® 6730L
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yVpVcr_Formolene6730L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Formolene® 6730L is a high melt flow copolymer polypropylene designed for injection and compounding applications. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 33 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant 1(Injection Molded) | 966 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 160 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 97.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 51.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Hanwha Total PP FH22 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| ESTACARB PC 0820 V0 | Cossa Polimeri S.r.l. | PC | ESTACARB |
| Ingeo™ 6204D | NatureWorks® LLC | PLA | Ingeo™ |
| Innothane® FM-109 | Innovative Polymers, Inc. | TSU | Innothane® |
| PETILEN F2-21T | PETKIM Petrokimya Holding A.S. | LDPE | PETILEN |
